This is the latest recevied telemetry packets stored in our database for station/object HS4RAY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1734929620 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734928706 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0 % |
| 1734927789 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0 % |
| 1734926875 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734925961 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 % |
| 1734925047 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734924134 | 0 Pkt | 1 Pkt | 0 Pkt | -39 dBm | 0 % |
| 1734922303 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0 % |
| 1734921389 | 0 Pkt | 1 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734920475 | 0 Pkt | 2 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734919561 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0 % |
| 1734918647 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 0 % |
| 1734917733 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734916816 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0 % |
| 1734915902 | 0 Pkt | 1 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734914988 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734914074 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 % |
| 1734913161 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 % |
| 1734912247 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 % |
| 1734911333 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0 % |
| 1734910419 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 % |
| 1734909505 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0 % |
| 1734908591 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0 % |
| 1734907677 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 0 % |
| 1734906763 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)