RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TF1MT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TF1MT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffTo*
1736944685	12.64 Volt	20 Pkt	90 Pcnt	95 Pcnt
1736943785	12.64 Volt	20 Pkt	92 Pcnt	95 Pcnt
1736942885	12.64 Volt	20 Pkt	92 Pcnt	95 Pcnt
1736941985	12.64 Volt	20 Pkt	92 Pcnt	95 Pcnt
1736941085	12.64 Volt	20 Pkt	92 Pcnt	95 Pcnt
1736940185	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736939285	12.64 Volt	20 Pkt	96 Pcnt	95 Pcnt
1736938385	12.64 Volt	20 Pkt	93 Pcnt	95 Pcnt
1736937485	12.64 Volt	20 Pkt	92 Pcnt	95 Pcnt
1736936585	12.64 Volt	20 Pkt	91 Pcnt	95 Pcnt
1736935685	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736934785	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736933885	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736932985	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736932085	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736931185	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736930285	12.64 Volt	20 Pkt	100 Pcnt	95 Pcnt
1736929385	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736928485	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736927585	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736926685	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736925785	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736924885	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736923986	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt
1736923086	12.64 Volt	20 Pkt	95 Pcnt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)