RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LZ2KAC-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ2KAC-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734953053	40 Pkt	2 Pkt	-70 dBm	14.62 V
1734951243	43 Pkt	0 Pkt	-70 dBm	14.6 V
1734949433	39 Pkt	0 Pkt	-70 dBm	14.62 V
1734947623	48 Pkt	0 Pkt	-69 dBm	14.62 V
1734945813	50 Pkt	0 Pkt	-69 dBm	14.6 V
1734944003	37 Pkt	0 Pkt	-69 dBm	14.62 V
1734942193	46 Pkt	0 Pkt	-70 dBm	14.6 V
1734940383	41 Pkt	0 Pkt	-69 dBm	14.62 V
1734938573	48 Pkt	0 Pkt	-70 dBm	14.62 V
1734936762	47 Pkt	0 Pkt	-70 dBm	14.6 V
1734929522	44 Pkt	0 Pkt	-70 dBm	14.6 V
1734927712	48 Pkt	0 Pkt	-69 dBm	14.62 V
1734925902	46 Pkt	0 Pkt	-70 dBm	14.6 V
1734924092	46 Pkt	1 Pkt	-69 dBm	14.62 V
1734922282	43 Pkt	1 Pkt	-69 dBm	14.62 V
1734920472	47 Pkt	2 Pkt	-71 dBm	14.6 V
1734918662	46 Pkt	0 Pkt	-69 dBm	14.6 V
1734916852	1 Pkt	0 Pkt	-71 dBm	14.6 V
1734915544	48 Pkt	1 Pkt	-69 dBm	14.62 V
1734913734	40 Pkt	0 Pkt	-69 dBm	14.62 V
1734911924	40 Pkt	0 Pkt	-69 dBm	14.62 V
1734910114	40 Pkt	0 Pkt	-70 dBm	14.6 V
1734908304	53 Pkt	0 Pkt	-70 dBm	14.6 V
1734906494	37 Pkt	1 Pkt	-68 dBm	14.62 V
1734904684	60 Pkt	0 Pkt	-68 dBm	14.62 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)