This is the latest recevied telemetry packets stored in our database for station/object ED5YAM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VOLT* | TMP* | TX* | WIND* | CHG* |
---|---|---|---|---|---|
1719818187 | 490 | 597 | 617 | 65 | 541 |
1719818006 | 501 | 597 | 835 | 32 | 551 |
1719817825 | 497 | 597 | 125 | 63 | 539 |
1719817645 | 496 | 597 | 126 | 37 | 540 |
1719817465 | 490 | 597 | 127 | 48 | 542 |
1719817285 | 494 | 597 | 127 | 33 | 527 |
1719817105 | 497 | 597 | 682 | 55 | 528 |
1719816924 | 503 | 597 | 999 | 42 | 526 |
1719816744 | 503 | 597 | 999 | 25 | 524 |
1719816564 | 503 | 597 | 999 | 16 | 523 |
1719816384 | 503 | 597 | 999 | 44 | 521 |
1719816204 | 503 | 597 | 999 | 47 | 521 |
1719816024 | 502 | 597 | 999 | 37 | 520 |
1719815844 | 502 | 597 | 999 | 55 | 518 |
1719815664 | 502 | 597 | 999 | 70 | 522 |
1719815482 | 502 | 596 | 999 | 25 | 538 |
1719815298 | 502 | 597 | 999 | 47 | 518 |
1719815117 | 502 | 597 | 999 | 85 | 516 |
1719814937 | 502 | 597 | 999 | 36 | 519 |
1719814756 | 502 | 596 | 999 | 59 | 521 |
1719814576 | 501 | 596 | 999 | 107 | 515 |
1719814396 | 501 | 596 | 999 | 71 | 530 |
1719814214 | 501 | 597 | 999 | 74 | 515 |
1719814034 | 500 | 596 | 999 | 69 | 509 |
1719813854 | 500 | 596 | 999 | 123 | 517 |
*Used Equation Coefficients:
VOLT: 0, 1, 0
TMP: 0, 1, 0
TX: 0, 1, 0
WIND: 0, 1, 0
CHG: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)