This is the latest recevied telemetry packets stored in our database for station/object BM5FWL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 01/13/2025 12:29:29 PM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 9 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 12:09:29 PM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 5 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 11:49:29 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 7 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 11:29:29 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 9 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 11:09:29 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 7 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 10:49:29 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 6 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 10:29:29 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 8 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 10:09:29 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 16 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 9:49:29 AM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 30 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 9:29:29 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 15 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 9:09:29 AM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 36 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 8:49:30 AM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 37 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 8:29:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 11 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 8:09:30 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 12 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 7:49:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 28 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 7:29:30 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 9 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 7:09:30 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 7 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 6:49:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 11 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 6:29:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 14 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 6:09:30 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 9 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 5:49:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 10 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 5:29:30 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 10 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 5:09:31 AM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 9 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 4:49:30 AM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 10 count/10m | 0 count/10m | 0 count/10m |
| 01/13/2025 4:29:31 AM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 17 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)