This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1717214067 | 37.88 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717212786 | 37.5 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717211500 | 37.58 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717210214 | 37.65 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717208932 | 37.65 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717207648 | 37.28 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717206367 | 37.8 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717205099 | 37.8 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717203820 | 37.28 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717202540 | 38.1 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717201259 | 38.1 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717199988 | 38.1 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717198724 | 38.1 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717197446 | 37.58 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717196158 | 38.18 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717194870 | 37.65 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717192322 | 38.25 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717191036 | 37.8 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717189765 | 38.4 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717188490 | 38.4 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717187220 | 38.48 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717185947 | 38.4 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717184673 | 38.63 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717183387 | 38.03 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
1717182123 | 38.1 Volt | -64 Pkt | 0 Pkt | 0 Pcnt | 0 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 0.5, -64
Dg1h: 0, 0, 0
Eff1h: 0, 0, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)