This is the latest recevied telemetry packets stored in our database for station/object DK9PS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734941079 | 17.6 deg C | 45.3 % | 0 | 0 | 0 |
| 1734940179 | 17.8 deg C | 43.9 % | 0 | 0 | 0 |
| 1734939279 | 17.9 deg C | 43.9 % | 0 | 0 | 0 |
| 1734938379 | 17.8 deg C | 43.2 % | 0 | 0 | 0 |
| 1734937479 | 18.1 deg C | 42.5 % | 0 | 0 | 0 |
| 1734936579 | 18.5 deg C | 42 % | 0 | 0 | 0 |
| 1734930278 | 18.2 deg C | 42.9 % | 0 | 0 | 0 |
| 1734929963 | 18.2 deg C | 42.8 % | 0 | 0 | 0 |
| 1734929063 | 18.3 deg C | 42.7 % | 0 | 0 | 0 |
| 1734928162 | 18 deg C | 43.5 % | 0 | 0 | 0 |
| 1734927262 | 17.6 deg C | 44.1 % | 0 | 0 | 0 |
| 1734926362 | 17.4 deg C | 44.5 % | 0 | 0 | 0 |
| 1734925462 | 17.2 deg C | 44.9 % | 0 | 0 | 0 |
| 1734924562 | 17.1 deg C | 45.2 % | 0 | 0 | 0 |
| 1734923662 | 17.3 deg C | 45 % | 0 | 0 | 0 |
| 1734922762 | 17.4 deg C | 44.8 % | 0 | 0 | 0 |
| 1734921862 | 17.4 deg C | 44.8 % | 0 | 0 | 0 |
| 1734920946 | 17.3 deg C | 44.9 % | 0 | 0 | 0 |
| 1734920046 | 17.2 deg C | 45.2 % | 0 | 0 | 0 |
| 1734919146 | 17.2 deg C | 45.1 % | 0 | 0 | 0 |
| 1734918246 | 17.3 deg C | 45.1 % | 0 | 0 | 0 |
| 1734917913 | 17.3 deg C | 45.2 % | 0 | 0 | 0 |
| 1734917013 | 17.4 deg C | 45.2 % | 0 | 0 | 0 |
| 1734916113 | 17.5 deg C | 45 % | 0 | 0 | 0 |
| 1734915213 | 17.6 deg C | 44.7 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)