This is the latest recevied telemetry packets stored in our database for station/object F1ZSG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PA Temp* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730424244 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730423945 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730423644 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730423346 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730423046 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730422744 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730422444 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730422144 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730421843 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730421546 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730421244 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730420943 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730420644 | 31.11 deg.C | 0 | 0 | 0 | 0 |
| 1730420344 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730420044 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730419744 | 31.43 deg.C | 0 | 0 | 0 | 0 |
| 1730419444 | 31.43 deg.C | 0 | 0 | 0 | 0 |
| 1730419144 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730418844 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730418544 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730418244 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730417944 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730417345 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730417044 | 31.27 deg.C | 0 | 0 | 0 | 0 |
| 1730416744 | 31.27 deg.C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
PA Temp: 0, 0.16016, -40
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)