RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA2IK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734967050	120 Pkt	13 Pkt	0 Pkt	-62 dBm	0.08 V
1734966124	103 Pkt	12 Pkt	0 Pkt	-62 dBm	0.08 V
1734964398	10 Pkt	0 Pkt	0 Pkt	-62 dBm	0.08 V
1734963627	101 Pkt	19 Pkt	1 Pkt	-64 dBm	0.08 V
1734962703	98 Pkt	18 Pkt	2 Pkt	-62 dBm	0.08 V
1734961778	115 Pkt	17 Pkt	1 Pkt	-62 dBm	0.08 V
1734960854	104 Pkt	17 Pkt	0 Pkt	-62 dBm	0.08 V
1734959931	105 Pkt	14 Pkt	2 Pkt	-62 dBm	0.08 V
1734959007	107 Pkt	15 Pkt	0 Pkt	-62 dBm	0.08 V
1734958085	104 Pkt	11 Pkt	2 Pkt	-62 dBm	0.08 V
1734957160	11 Pkt	0 Pkt	2 Pkt	-62 dBm	0.08 V
1734956572	112 Pkt	14 Pkt	3 Pkt	-62 dBm	0.08 V
1734955650	101 Pkt	15 Pkt	4 Pkt	-62 dBm	0.08 V
1734954728	94 Pkt	10 Pkt	2 Pkt	-62 dBm	0.08 V
1734953807	7 Pkt	1 Pkt	0 Pkt	-62 dBm	0.08 V
1734953536	105 Pkt	12 Pkt	1 Pkt	-62 dBm	0.08 V
1734951303	8 Pkt	0 Pkt	0 Pkt	-62 dBm	0.08 V
1734950812	112 Pkt	14 Pkt	3 Pkt	-62 dBm	0.08 V
1734949888	101 Pkt	13 Pkt	2 Pkt	-62 dBm	0.08 V
1734948964	104 Pkt	12 Pkt	1 Pkt	-62 dBm	0.08 V
1734948041	12 Pkt	1 Pkt	1 Pkt	-62 dBm	0.08 V
1734947687	86 Pkt	17 Pkt	3 Pkt	-62 dBm	0.08 V
1734946763	99 Pkt	19 Pkt	5 Pkt	-62 dBm	0.08 V
1734945842	94 Pkt	17 Pkt	2 Pkt	-62 dBm	0.08 V
1734944919	100 Pkt	17 Pkt	3 Pkt	-62 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)