RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU2BFM-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2BFM-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	Voltage*
1734921753	-48 dBm	12.41 V
1734921431	-47 dBm	12.41 V
1734921109	-47 dBm	12.41 V
1734920787	-48 dBm	12.41 V
1734920465	-48 dBm	12.41 V
1734920143	-50 dBm	12.41 V
1734919821	-47 dBm	12.41 V
1734919499	-50 dBm	12.41 V
1734919177	-55 dBm	12.41 V
1734918855	-50 dBm	12.41 V
1734918533	-51 dBm	12.39 V
1734918211	-46 dBm	12.41 V
1734917889	-46 dBm	12.41 V
1734917567	-47 dBm	12.41 V
1734917245	-48 dBm	12.41 V
1734916923	-49 dBm	12.41 V
1734916601	-46 dBm	12.41 V
1734916279	-47 dBm	12.41 V
1734915957	-48 dBm	12.41 V
1734885591	-61 dBm	12.41 V
1734885269	-52 dBm	12.41 V
1734884947	-52 dBm	12.41 V
1734884625	-51 dBm	12.41 V
1734884303	-56 dBm	12.41 V
1734883981	-59 dBm	12.41 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)