This is the latest recevied telemetry packets stored in our database for station/object ED4ZAA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1734953643 | 14.33 Volt | 60 Pkt | 50 Pkt | 71 Pcnt | -62 ºC |
| 1734950039 | 14.18 Volt | 40 Pkt | 40 Pkt | 59 Pcnt | -62 ºC |
| 1734946435 | 14.1 Volt | 50 Pkt | 40 Pkt | 71 Pcnt | -62 ºC |
| 1734942832 | 12.98 Volt | 50 Pkt | 50 Pkt | 72 Pcnt | -62 ºC |
| 1734939229 | 12.15 Volt | 50 Pkt | 50 Pkt | 77 Pcnt | -62 ºC |
| 1734928418 | 12.15 Volt | 50 Pkt | 50 Pkt | 80 Pcnt | -62 ºC |
| 1734924814 | 12.23 Volt | 50 Pkt | 40 Pkt | 77 Pcnt | -62 ºC |
| 1734921211 | 12.23 Volt | 50 Pkt | 50 Pkt | 74 Pcnt | -62 ºC |
| 1734917607 | 12.23 Volt | 50 Pkt | 40 Pkt | 70 Pcnt | -62 ºC |
| 1734914004 | 12.3 Volt | 40 Pkt | 30 Pkt | 61 Pcnt | -62 ºC |
| 1734910401 | 12.3 Volt | 40 Pkt | 40 Pkt | 65 Pcnt | -62 ºC |
| 1734906797 | 12.3 Volt | 40 Pkt | 40 Pkt | 62 Pcnt | -62 ºC |
| 1734903194 | 12.3 Volt | 40 Pkt | 40 Pkt | 82 Pcnt | -62 ºC |
| 1734899590 | 12.38 Volt | 50 Pkt | 40 Pkt | 77 Pcnt | -62 ºC |
| 1734895988 | 10.58 Volt | 40 Pkt | 40 Pkt | 75 Pcnt | -62 ºC |
| 1734892383 | 12.38 Volt | 30 Pkt | 30 Pkt | 79 Pcnt | -62 ºC |
| 1734888780 | 12.38 Volt | 40 Pkt | 40 Pkt | 77 Pcnt | -62 ºC |
| 1734885176 | 12.45 Volt | 40 Pkt | 40 Pkt | 74 Pcnt | -62 ºC |
| 1734881573 | 12.53 Volt | 40 Pkt | 30 Pkt | 72 Pcnt | -62 ºC |
| 1734877969 | 13.8 Volt | 80 Pkt | 50 Pkt | 74 Pcnt | -62 ºC |
| 1734874366 | 13.73 Volt | 80 Pkt | 40 Pkt | 90 Pcnt | -62 ºC |
| 1734870763 | 13.73 Volt | 100 Pkt | 80 Pkt | 86 Pcnt | -62 ºC |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -62
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)