This is the latest recevied telemetry packets stored in our database for station/object SR9WXY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10min* | Tx10min* | Digi10min* | HostTx10m* | Tempre* |
---|---|---|---|---|---|
1716336257 | 105 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 28 DegC |
1716335655 | 93 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 28 DegC |
1716335055 | 127 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716334455 | 96 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 28.5 DegC |
1716333855 | 105 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716333255 | 110 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716332655 | 99 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 28.5 DegC |
1716332054 | 74 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716331454 | 108 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716330854 | 113 Pkt | 9 Pkt | 6 Pkt | 0 Pkt | 28.5 DegC |
1716330252 | 106 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 28.5 DegC |
1716329653 | 96 Pkt | 10 Pkt | 3 Pkt | 0 Pkt | 28.5 DegC |
1716329041 | 99 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 28.5 DegC |
1716328441 | 90 Pkt | 8 Pkt | 5 Pkt | 0 Pkt | 28.5 DegC |
1716327841 | 96 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 28.5 DegC |
1716327241 | 84 Pkt | 4 Pkt | 1 Pkt | 0 Pkt | 29 DegC |
1716326641 | 98 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 29 DegC |
1716326041 | 99 Pkt | 4 Pkt | 1 Pkt | 0 Pkt | 29 DegC |
1716325441 | 94 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 29 DegC |
1716324841 | 103 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 29 DegC |
1716324241 | 113 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 29 DegC |
1716323639 | 101 Pkt | 10 Pkt | 8 Pkt | 0 Pkt | 29 DegC |
1716323039 | 93 Pkt | 9 Pkt | 6 Pkt | 0 Pkt | 29 DegC |
1716322437 | 79 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 29 DegC |
1716321837 | 103 Pkt | 9 Pkt | 6 Pkt | 0 Pkt | 29 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
HostTx10m: 0, 1, 0
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)