RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HP3ICC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP3ICC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RSSI*	Voltage*
1734970016	8 Pkt	-71 dBm	9.35 V
1734965197	2 Pkt	-72 dBm	9.35 V
1734963972	3 Pkt	-74 dBm	9.52 V
1734962747	2 Pkt	-72 dBm	9.35 V
1734961523	2 Pkt	-72 dBm	9.37 V
1734960298	4 Pkt	-72 dBm	9.35 V
1734959073	3 Pkt	-73 dBm	9.35 V
1734957848	7 Pkt	-72 dBm	9.35 V
1734956624	2 Pkt	-76 dBm	9.37 V
1734955399	2 Pkt	-75 dBm	9.31 V
1734954174	2 Pkt	-77 dBm	9.37 V
1734952949	2 Pkt	-76 dBm	9.37 V
1734951724	2 Pkt	-77 dBm	9.37 V
1734950500	2 Pkt	-75 dBm	9.37 V
1734949275	2 Pkt	-77 dBm	9.35 V
1734948050	2 Pkt	-76 dBm	9.35 V
1734946826	2 Pkt	-77 dBm	9.35 V
1734945600	2 Pkt	-77 dBm	9.54 V
1734944376	2 Pkt	-77 dBm	9.54 V
1734943151	2 Pkt	-77 dBm	9.37 V
1734941926	2 Pkt	-77 dBm	9.37 V
1734940701	3 Pkt	-76 dBm	9.37 V
1734939477	2 Pkt	-77 dBm	9.37 V
1734938252	2 Pkt	-77 dBm	9.52 V
1734937027	2 Pkt	-77 dBm	9.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)