RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

W8MAI-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8MAI-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	U1*	Temp*	Rx1h*	Dg1h*
1736734722	13.4 Volt	3 C	160 Pkt	60 Pkt
1736734721	13.4 Volt	3 C	160 Pkt	60 Pkt
1736732923	13.4 Volt	3 C	160 Pkt	50 Pkt
1736732922	13.4 Volt	3 C	160 Pkt	50 Pkt
1736731127	13.4 Volt	3 C	170 Pkt	50 Pkt
1736731122	13.4 Volt	3 C	170 Pkt	50 Pkt
1736729343	13.4 Volt	3 C	130 Pkt	40 Pkt
1736729327	13.4 Volt	3 C	130 Pkt	40 Pkt
1736727523	13.4 Volt	3 C	120 Pkt	40 Pkt
1736727522	13.4 Volt	3 C	120 Pkt	40 Pkt
1736725724	13.4 Volt	3 C	160 Pkt	50 Pkt
1736725722	13.4 Volt	3 C	160 Pkt	50 Pkt
1736723923	13.4 Volt	3 C	190 Pkt	60 Pkt
1736723922	13.4 Volt	3 C	190 Pkt	60 Pkt
1736722123	13.4 Volt	3 C	220 Pkt	80 Pkt
1736722122	13.4 Volt	3 C	220 Pkt	80 Pkt
1736720323	13.4 Volt	3 C	210 Pkt	80 Pkt
1736720322	13.4 Volt	3 C	210 Pkt	80 Pkt
1736718526	13.4 Volt	3 C	190 Pkt	70 Pkt
1736718522	13.4 Volt	3 C	190 Pkt	70 Pkt
1736716723	13.4 Volt	3 C	200 Pkt	70 Pkt
1736716722	13.4 Volt	3 C	200 Pkt	70 Pkt
1736714924	13.4 Volt	2.5 C	200 Pkt	80 Pkt
1736714922	13.4 Volt	2.5 C	200 Pkt	80 Pkt
1736713126	13.4 Volt	2.5 C	190 Pkt	70 Pkt

*Used Equation Coefficients:

U1: 0, 0.1, 0

U2: 0, 0.1, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)