This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | CPU* | Tx* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734882632 | 12.3 Volts | 50 DegC | 32 pkts | 0 | 0 |
| 1734879032 | 12.4 Volts | 50 DegC | 44 pkts | 0 | 0 |
| 1734875432 | 12.4 Volts | 51 DegC | 36 pkts | 0 | 0 |
| 1734871833 | 12.5 Volts | 52 DegC | 41 pkts | 0 | 0 |
| 1734868232 | 12.5 Volts | 54 DegC | 31 pkts | 0 | 0 |
| 1734864633 | 12.5 Volts | 56 DegC | 37 pkts | 0 | 0 |
| 1734861033 | 12.7 Volts | 58 DegC | 34 pkts | 0 | 0 |
| 1734857433 | 12.7 Volts | 63 DegC | 30 pkts | 0 | 0 |
| 1734853832 | 12.9 Volts | 65 DegC | 34 pkts | 0 | 0 |
| 1734850233 | 12.9 Volts | 69 DegC | 31 pkts | 0 | 0 |
| 1734846631 | 13.1 Volts | 71 DegC | 27 pkts | 0 | 0 |
| 1734843032 | 14.2 Volts | 71 DegC | 35 pkts | 0 | 0 |
| 1734839432 | 13.9 Volts | 70 DegC | 25 pkts | 0 | 0 |
| 1734835832 | 14 Volts | 68 DegC | 32 pkts | 0 | 0 |
| 1734832232 | 14 Volts | 66 DegC | 32 pkts | 0 | 0 |
| 1734828632 | 14 Volts | 63 DegC | 38 pkts | 0 | 0 |
| 1734817832 | 13.3 Volts | 55 DegC | 29 pkts | 0 | 0 |
| 1734814232 | 13.1 Volts | 51 DegC | 26 pkts | 0 | 0 |
| 1734810632 | 12.4 Volts | 49 DegC | 9 pkts | 0 | 0 |
| 1734807032 | 12.3 Volts | 49 DegC | 5 pkts | 0 | 0 |
| 1734803432 | 12.4 Volts | 50 DegC | 5 pkts | 0 | 0 |
| 1734799833 | 12.4 Volts | 50 DegC | 5 pkts | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Tx: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)