This is the latest recevied telemetry packets stored in our database for station/object DC7OS-L4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716137669 | 25.4 deg C | 64 % | 0 | 0 | 0 |
1716136769 | 25.4 deg C | 61.8 % | 0 | 0 | 0 |
1716135869 | 25.9 deg C | 60.4 % | 0 | 0 | 0 |
1716134968 | 26.4 deg C | 59.7 % | 0 | 0 | 0 |
1716134068 | 26.2 deg C | 59.6 % | 0 | 0 | 0 |
1716133168 | 25.9 deg C | 60.2 % | 0 | 0 | 0 |
1716132268 | 26 deg C | 59.7 % | 0 | 0 | 0 |
1716131936 | 26.1 deg C | 59.5 % | 0 | 0 | 0 |
1716131036 | 26.4 deg C | 59.7 % | 0 | 0 | 0 |
1716130136 | 26.1 deg C | 60.3 % | 0 | 0 | 0 |
1716129236 | 26.1 deg C | 60.7 % | 0 | 0 | 0 |
1716128336 | 26 deg C | 60.7 % | 0 | 0 | 0 |
1716127436 | 25.9 deg C | 60.7 % | 0 | 0 | 0 |
1716126536 | 25.7 deg C | 61.4 % | 0 | 0 | 0 |
1716125636 | 25.5 deg C | 61.2 % | 0 | 0 | 0 |
1716124735 | 25.4 deg C | 60.9 % | 0 | 0 | 0 |
1716123835 | 25.3 deg C | 61.4 % | 0 | 0 | 0 |
1716122935 | 25.4 deg C | 61.4 % | 0 | 0 | 0 |
1716122035 | 25.3 deg C | 61.8 % | 0 | 0 | 0 |
1716121135 | 25.5 deg C | 60.3 % | 0 | 0 | 0 |
1716120235 | 25.8 deg C | 59.2 % | 0 | 0 | 0 |
1716119904 | 26 deg C | 58.7 % | 0 | 0 | 0 |
1716119003 | 25.7 deg C | 59.5 % | 0 | 0 | 0 |
1716118103 | 25.8 deg C | 59.1 % | 0 | 0 | 0 |
1716117203 | 25.8 deg C | 58.9 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)