RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IQ3PN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3PN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Volt*
1734919712	68 Pkt	410 Pkt	0.05 Pcnt	13.11 Volt
1734919412	49 Pkt	420 Pkt	0.05 Pcnt	13.11 Volt
1734919112	63 Pkt	440 Pkt	0.05 Pcnt	13.11 Volt
1734918812	68 Pkt	460 Pkt	0.05 Pcnt	13.11 Volt
1734918512	52 Pkt	480 Pkt	0.05 Pcnt	13.11 Volt
1734918212	66 Pkt	490 Pkt	0.05 Pcnt	13.11 Volt
1734917912	64 Pkt	500 Pkt	0.05 Pcnt	13.11 Volt
1734917612	46 Pkt	520 Pkt	0.05 Pcnt	13.11 Volt
1734917312	57 Pkt	520 Pkt	0.05 Pcnt	13.11 Volt
1734917012	77 Pkt	550 Pkt	0.05 Pcnt	13.11 Volt
1734916712	74 Pkt	550 Pkt	0.05 Pcnt	13.11 Volt
1734916412	77 Pkt	550 Pkt	0.05 Pcnt	13.11 Volt
1734916112	98 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734915812	83 Pkt	570 Pkt	0.05 Pcnt	13.11 Volt
1734915512	90 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734915212	93 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734914912	79 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734914612	95 Pkt	570 Pkt	0.05 Pcnt	13.11 Volt
1734914312	85 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734914012	80 Pkt	560 Pkt	0.05 Pcnt	13.11 Volt
1734913712	77 Pkt	570 Pkt	0.05 Pcnt	13.11 Volt
1734913412	76 Pkt	570 Pkt	0.05 Pcnt	13.11 Volt
1734913112	87 Pkt	590 Pkt	0.05 Pcnt	13.11 Volt
1734912812	100 Pkt	590 Pkt	0.05 Pcnt	13.11 Volt
1734912512	91 Pkt	590 Pkt	0.05 Pcnt	13.11 Volt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Volt: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)