RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

EB7RCS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EB7RCS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EfTot*
1734899203	12.53 Volt	90 Pkt	90 Pcnt	72 Pcnt
1734898903	12.53 Volt	90 Pkt	89 Pcnt	72 Pcnt
1734898003	12.53 Volt	100 Pkt	88 Pcnt	72 Pcnt
1734897703	12.53 Volt	100 Pkt	88 Pcnt	72 Pcnt
1734897403	12.53 Volt	100 Pkt	89 Pcnt	72 Pcnt
1734897103	12.53 Volt	100 Pkt	90 Pcnt	72 Pcnt
1734896803	12.53 Volt	100 Pkt	89 Pcnt	72 Pcnt
1734896503	12.53 Volt	100 Pkt	89 Pcnt	72 Pcnt
1734896203	12.53 Volt	100 Pkt	90 Pcnt	72 Pcnt
1734895903	12.53 Volt	90 Pkt	91 Pcnt	72 Pcnt
1734895603	12.53 Volt	80 Pkt	91 Pcnt	72 Pcnt
1734895303	12.53 Volt	80 Pkt	92 Pcnt	72 Pcnt
1734895003	12.53 Volt	80 Pkt	91 Pcnt	72 Pcnt
1734894703	12.53 Volt	80 Pkt	93 Pcnt	72 Pcnt
1734894403	12.53 Volt	80 Pkt	92 Pcnt	72 Pcnt
1734894103	12.53 Volt	80 Pkt	91 Pcnt	72 Pcnt
1734893803	12.53 Volt	70 Pkt	85 Pcnt	72 Pcnt
1734893503	12.53 Volt	70 Pkt	86 Pcnt	72 Pcnt
1734893203	12.53 Volt	70 Pkt	88 Pcnt	72 Pcnt
1734892903	12.53 Volt	80 Pkt	88 Pcnt	72 Pcnt
1734892603	12.53 Volt	80 Pkt	87 Pcnt	72 Pcnt
1734890803	12.53 Volt	110 Pkt	80 Pcnt	72 Pcnt
1734890504	12.53 Volt	110 Pkt	80 Pcnt	72 Pcnt
1734890204	12.53 Volt	120 Pkt	83 Pcnt	72 Pcnt
1734889904	12.53 Volt	130 Pkt	84 Pcnt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)