RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TB6BAC-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB6BAC-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	Voltage*
1735004448	-43 dBm	11.65 V
1735003525	-41 dBm	11.65 V
1735002602	-44 dBm	11.65 V
1735001679	-44 dBm	11.65 V
1735000756	-43 dBm	11.65 V
1734999833	-45 dBm	11.65 V
1734999171	-41 dBm	11.65 V
1734998247	-43 dBm	11.65 V
1734997324	-39 dBm	11.65 V
1734996400	-42 dBm	11.65 V
1734995477	-40 dBm	11.65 V
1734994553	-40 dBm	11.65 V
1734993630	-41 dBm	11.65 V
1734992706	-40 dBm	11.65 V
1734991783	-35 dBm	11.65 V
1734990859	-42 dBm	11.65 V
1734989936	-41 dBm	11.65 V
1734989013	-38 dBm	11.63 V
1734988089	-38 dBm	11.65 V
1734987166	-37 dBm	11.65 V
1734986243	-40 dBm	11.65 V
1734985320	-40 dBm	11.65 V
1734984396	-41 dBm	11.65 V
1734983473	-39 dBm	11.65 V
1734982550	-40 dBm	11.65 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)