This is the latest recevied telemetry packets stored in our database for station/object HS3BVN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1720015419 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 8 % |
1720013591 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 8 % |
1720011763 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 8 % |
1720009934 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 8 % |
1720008106 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 8 % |
1720006278 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 8 % |
1720004449 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 7 % |
1720002621 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1720000793 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 7 % |
1719998965 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1719997136 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1719995308 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 7 % |
1719993480 | 0 Pkt | 1 Pkt | 0 Pkt | -71 dBm | 7 % |
1719991651 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1719989823 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 7 % |
1719987995 | 0 Pkt | 2 Pkt | 0 Pkt | -71 dBm | 7 % |
1719986167 | 0 Pkt | 1 Pkt | 0 Pkt | -70 dBm | 7 % |
1719984338 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1719982510 | 0 Pkt | 1 Pkt | 0 Pkt | -70 dBm | 7 % |
1719980682 | 0 Pkt | 2 Pkt | 0 Pkt | -70 dBm | 8 % |
1719978853 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 7 % |
1719977025 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 7 % |
1719975197 | 0 Pkt | 3 Pkt | 0 Pkt | -71 dBm | 8 % |
1719973369 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 8 % |
1719971540 | 0 Pkt | 4 Pkt | 0 Pkt | -72 dBm | 8 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)