RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HP3ICC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP3ICC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1734980228	20 Pkt	-5 dBm	5.21 V
1734978402	13 Pkt	-6 dBm	5.17 V
1734976577	17 Pkt	-4 dBm	5.21 V
1734974751	15 Pkt	-4 dBm	5.17 V
1734972924	17 Pkt	-5 dBm	5.13 V
1734971098	24 Pkt	-7 dBm	5.13 V
1734969273	25 Pkt	-8 dBm	5.17 V
1734967447	23 Pkt	-6 dBm	5.19 V
1734965621	19 Pkt	-7 dBm	5.17 V
1734963795	16 Pkt	-6 dBm	5.17 V
1734961969	14 Pkt	-8 dBm	5.13 V
1734960143	15 Pkt	-5 dBm	5.19 V
1734958318	24 Pkt	-5 dBm	5.21 V
1734956492	17 Pkt	-7 dBm	5.19 V
1734954666	23 Pkt	-6 dBm	5.19 V
1734952840	22 Pkt	-6 dBm	5.19 V
1734951014	20 Pkt	-5 dBm	5.17 V
1734949188	16 Pkt	-6 dBm	5.17 V
1734947363	16 Pkt	-4 dBm	5.17 V
1734945537	25 Pkt	-5 dBm	5.17 V
1734943711	17 Pkt	-5 dBm	5.17 V
1734941885	22 Pkt	-6 dBm	5.19 V
1734940059	14 Pkt	-5 dBm	5.13 V
1734938234	20 Pkt	-5 dBm	5.19 V
1734936407	22 Pkt	-7 dBm	5.19 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)