RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

DM0RLB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM0RLB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734920926	13.75 Volt	890 Pkt	50 Pkt	89 Pcnt
1734919545	13.75 Volt	850 Pkt	50 Pkt	88 Pcnt
1734918166	13.75 Volt	830 Pkt	40 Pkt	87 Pcnt
1734916786	13.75 Volt	840 Pkt	40 Pkt	89 Pcnt
1734915406	13.75 Volt	820 Pkt	40 Pkt	89 Pcnt
1734914026	13.75 Volt	830 Pkt	40 Pkt	88 Pcnt
1734912646	13.75 Volt	850 Pkt	40 Pkt	87 Pcnt
1734911266	13.75 Volt	880 Pkt	50 Pkt	87 Pcnt
1734909886	13.75 Volt	850 Pkt	50 Pkt	87 Pcnt
1734908506	13.75 Volt	850 Pkt	50 Pkt	89 Pcnt
1734907126	13.75 Volt	840 Pkt	50 Pkt	86 Pcnt
1734905746	13.75 Volt	870 Pkt	60 Pkt	80 Pcnt
1734904366	13.75 Volt	910 Pkt	70 Pkt	77 Pcnt
1734902986	13.75 Volt	920 Pkt	60 Pkt	77 Pcnt
1734901606	13.75 Volt	910 Pkt	60 Pkt	79 Pcnt
1734900226	13.75 Volt	880 Pkt	60 Pkt	81 Pcnt
1734898846	13.75 Volt	870 Pkt	60 Pkt	80 Pcnt
1734897466	13.75 Volt	870 Pkt	60 Pkt	80 Pcnt
1734896087	13.83 Volt	880 Pkt	50 Pkt	79 Pcnt
1734894707	13.75 Volt	900 Pkt	50 Pkt	80 Pcnt
1734893326	13.75 Volt	910 Pkt	60 Pkt	82 Pcnt
1734891946	13.75 Volt	900 Pkt	60 Pkt	81 Pcnt
1734890566	13.75 Volt	900 Pkt	60 Pkt	80 Pcnt
1734889186	13.75 Volt	910 Pkt	60 Pkt	81 Pcnt
1734887807	13.75 Volt	930 Pkt	60 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)