RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM4KCA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KCA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RSSI*	Voltage*
1734952211	31 dBm	14.15 V
1734951289	31 dBm	13.99 V
1734950367	31 dBm	14.11 V
1734948523	31 dBm	13.99 V
1734947601	31 dBm	13.97 V
1734945757	31 dBm	14.58 V
1734943917	31 dBm	14.83 V
1734942991	31 dBm	14.56 V
1734942069	31 dBm	14.79 V
1734940225	31 dBm	14.23 V
1734938382	31 dBm	14.13 V
1734937459	31 dBm	13.66 V
1734936537	31 dBm	13.06 V
1734930082	31 dBm	12.71 V
1734929160	31 dBm	12.71 V
1734923628	31 dBm	12.76 V
1734922707	31 dBm	12.76 V
1734920862	31 dBm	12.76 V
1734919940	31 dBm	12.8 V
1734919018	31 dBm	12.8 V
1734918096	31 dBm	12.82 V
1734915330	31 dBm	12.82 V
1734914410	31 dBm	12.84 V
1734912564	31 dBm	12.84 V
1734911642	31 dBm	12.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)