This is the latest recevied telemetry packets stored in our database for station/object DB0FRO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 04/08/2025 3:12:22 PM+00:00 | 0.07 Rx Erlang | 0.04 Tx Erlang | 58 count/10m | 1 count/10m | 31 count/10m |
| 04/08/2025 2:52:22 PM+00:00 | 0.08 Rx Erlang | 0.05 Tx Erlang | 57 count/10m | 0 count/10m | 34 count/10m |
| 04/08/2025 2:32:22 PM+00:00 | 0.08 Rx Erlang | 0.04 Tx Erlang | 65 count/10m | 0 count/10m | 31 count/10m |
| 04/08/2025 2:12:24 PM+00:00 | 0.07 Rx Erlang | 0.04 Tx Erlang | 60 count/10m | 0 count/10m | 28 count/10m |
| 04/08/2025 1:32:30 PM+00:00 | 0.08 Rx Erlang | 0.04 Tx Erlang | 63 count/10m | 0 count/10m | 27 count/10m |
| 04/08/2025 11:12:22 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 51 count/10m | 1 count/10m | 25 count/10m |
| 04/08/2025 10:52:22 AM+00:00 | 0.07 Rx Erlang | 0.04 Tx Erlang | 64 count/10m | 0 count/10m | 33 count/10m |
| 04/08/2025 10:32:22 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 57 count/10m | 0 count/10m | 22 count/10m |
| 04/08/2025 10:12:22 AM+00:00 | 0.07 Rx Erlang | 0.03 Tx Erlang | 58 count/10m | 0 count/10m | 23 count/10m |
| 04/08/2025 9:53:17 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 50 count/10m | 0 count/10m | 24 count/10m |
| 04/08/2025 9:32:22 AM+00:00 | 0.06 Rx Erlang | 0.02 Tx Erlang | 48 count/10m | 0 count/10m | 19 count/10m |
| 04/08/2025 9:12:22 AM+00:00 | 0.05 Rx Erlang | 0.03 Tx Erlang | 51 count/10m | 0 count/10m | 22 count/10m |
| 04/08/2025 8:52:24 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 57 count/10m | 0 count/10m | 24 count/10m |
| 04/08/2025 8:32:31 AM+00:00 | 0.07 Rx Erlang | 0.03 Tx Erlang | 59 count/10m | 0 count/10m | 24 count/10m |
| 04/08/2025 8:12:22 AM+00:00 | 0.07 Rx Erlang | 0.04 Tx Erlang | 58 count/10m | 0 count/10m | 27 count/10m |
| 04/08/2025 7:52:22 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 50 count/10m | 0 count/10m | 24 count/10m |
| 04/08/2025 7:32:22 AM+00:00 | 0.06 Rx Erlang | 0.03 Tx Erlang | 46 count/10m | 0 count/10m | 22 count/10m |
| 04/08/2025 7:12:22 AM+00:00 | 0.05 Rx Erlang | 0.03 Tx Erlang | 47 count/10m | 0 count/10m | 23 count/10m |
| 04/08/2025 6:52:22 AM+00:00 | 0.09 Rx Erlang | 0.03 Tx Erlang | 77 count/10m | 0 count/10m | 31 count/10m |
| 04/08/2025 6:32:26 AM+00:00 | 0.07 Rx Erlang | 0.04 Tx Erlang | 68 count/10m | 1 count/10m | 30 count/10m |
| 04/08/2025 6:12:33 AM+00:00 | 0.08 Rx Erlang | 0.03 Tx Erlang | 64 count/10m | 4 count/10m | 24 count/10m |
| 04/08/2025 5:52:22 AM+00:00 | 0.08 Rx Erlang | 0.03 Tx Erlang | 66 count/10m | 3 count/10m | 22 count/10m |
| 04/08/2025 5:32:49 AM+00:00 | 0.1 Rx Erlang | 0.03 Tx Erlang | 77 count/10m | 2 count/10m | 25 count/10m |
| 04/08/2025 5:12:26 AM+00:00 | 0.08 Rx Erlang | 0.03 Tx Erlang | 76 count/10m | 1 count/10m | 22 count/10m |
| 04/08/2025 4:52:22 AM+00:00 | 0.09 Rx Erlang | 0.04 Tx Erlang | 84 count/10m | 0 count/10m | 29 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)