This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734921897 | -8.83 | -453.6 | 400 | 731 | 552 |
| 1734920998 | -8.51 | -453.6 | 400 | 733 | 553 |
| 1734920098 | -8.83 | -451.6 | 398.75 | 738 | 553 |
| 1734919198 | -8.51 | -451.6 | 396.88 | 740 | 550 |
| 1734918296 | -8.12 | -450.4 | 393.75 | 750 | 549 |
| 1734917398 | -8.12 | -448.8 | 394.38 | 749 | 550 |
| 1734916498 | -8.51 | -451.6 | 396.88 | 743 | 552 |
| 1734915598 | -8.51 | -452 | 397.5 | 739 | 551 |
| 1734914697 | -8.51 | -452.4 | 398.75 | 733 | 550 |
| 1734913798 | -8.51 | -453.2 | 398.75 | 731 | 550 |
| 1734912898 | -8.83 | -453.6 | 400 | 737 | 554 |
| 1734911998 | -8.51 | -454 | 400 | 743 | 557 |
| 1734911097 | -8.83 | -454 | 400 | 746 | 558 |
| 1734910198 | -8.83 | -453.6 | 400.63 | 749 | 560 |
| 1734909298 | -8.83 | -454.4 | 400 | 749 | 559 |
| 1734908398 | -8.51 | -454.4 | 400.63 | 750 | 560 |
| 1734907497 | -8.83 | -453.6 | 400 | 748 | 558 |
| 1734906598 | -8.83 | -453.6 | 399.38 | 748 | 558 |
| 1734905698 | -8.83 | -453.2 | 398.75 | 750 | 558 |
| 1734904798 | -8.51 | -452.4 | 398.75 | 753 | 558 |
| 1734903897 | -8.51 | -452 | 397.5 | 754 | 557 |
| 1734902998 | -8.51 | -451.6 | 396.88 | 754 | 556 |
| 1734902098 | -8.51 | -450.8 | 396.25 | 754 | 555 |
| 1734901198 | -8.51 | -450.8 | 395.63 | 754 | 554 |
| 1734900297 | -8.51 | -450.4 | 395 | 756 | 554 |
*Used Equation Coefficients:
Value1: 0, -0.0644, 15
Value2: 0, -0.4, -190
Value3: 0, 0.625, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)