RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ON4MAX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON4MAX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734900815	13.88 Volt	910 Pkt	270 Pkt	79 Pcnt
1734899016	13.88 Volt	890 Pkt	260 Pkt	79 Pcnt
1734897222	13.88 Volt	770 Pkt	260 Pkt	73 Pcnt
1734895416	13.88 Volt	760 Pkt	260 Pkt	74 Pcnt
1734893616	13.88 Volt	870 Pkt	280 Pkt	77 Pcnt
1734891814	13.88 Volt	920 Pkt	290 Pkt	78 Pcnt
1734890017	13.88 Volt	890 Pkt	270 Pkt	76 Pcnt
1734888216	13.88 Volt	860 Pkt	270 Pkt	76 Pcnt
1734886418	13.88 Volt	890 Pkt	290 Pkt	77 Pcnt
1734884617	13.88 Volt	910 Pkt	290 Pkt	78 Pcnt
1734882817	13.8 Volt	890 Pkt	270 Pkt	79 Pcnt
1734881015	13.88 Volt	920 Pkt	260 Pkt	79 Pcnt
1734879217	13.88 Volt	890 Pkt	270 Pkt	78 Pcnt
1734877414	13.88 Volt	830 Pkt	270 Pkt	76 Pcnt
1734875615	13.88 Volt	830 Pkt	280 Pkt	75 Pcnt
1734873819	13.88 Volt	910 Pkt	290 Pkt	76 Pcnt
1734872017	13.88 Volt	990 Pkt	290 Pkt	79 Pcnt
1734870217	13.88 Volt	1060 Pkt	290 Pkt	82 Pcnt
1734868418	13.88 Volt	980 Pkt	290 Pkt	80 Pcnt
1734866617	13.65 Volt	940 Pkt	280 Pkt	78 Pcnt
1734864815	13.88 Volt	920 Pkt	270 Pkt	78 Pcnt
1734863015	13.88 Volt	910 Pkt	250 Pkt	79 Pcnt
1734861220	13.88 Volt	930 Pkt	250 Pkt	82 Pcnt
1734859430	13.88 Volt	930 Pkt	270 Pkt	81 Pcnt
1734857616	13.88 Volt	960 Pkt	280 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)