RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK2RMY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RMY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734900850	13.8 Volt	60 Pkt	30 Pkt	56 Pcnt
1734899050	13.8 Volt	60 Pkt	30 Pkt	53 Pcnt
1734897250	13.8 Volt	70 Pkt	30 Pkt	64 Pcnt
1734896053	13.8 Volt	130 Pkt	40 Pkt	83 Pcnt
1734895450	13.8 Volt	80 Pkt	30 Pkt	67 Pcnt
1734893650	13.8 Volt	130 Pkt	40 Pkt	83 Pcnt
1734891850	13.8 Volt	150 Pkt	40 Pkt	90 Pcnt
1734890050	13.8 Volt	140 Pkt	40 Pkt	74 Pcnt
1734888250	13.8 Volt	110 Pkt	30 Pkt	61 Pcnt
1734886450	13.8 Volt	120 Pkt	30 Pkt	61 Pcnt
1734884650	13.8 Volt	160 Pkt	40 Pkt	73 Pcnt
1734882851	13.8 Volt	200 Pkt	60 Pkt	86 Pcnt
1734881050	13.8 Volt	190 Pkt	50 Pkt	87 Pcnt
1734880603	13.8 Volt	190 Pkt	60 Pkt	67 Pcnt
1734880588	13.8 Volt	180 Pkt	70 Pkt	64 Pcnt
1734879250	13.8 Volt	190 Pkt	60 Pkt	67 Pcnt
1734877450	13.8 Volt	180 Pkt	70 Pkt	64 Pcnt
1734875650	13.8 Volt	170 Pkt	60 Pkt	73 Pcnt
1734873850	13.8 Volt	140 Pkt	50 Pkt	69 Pcnt
1734872050	13.8 Volt	110 Pkt	40 Pkt	68 Pcnt
1734870250	13.8 Volt	120 Pkt	40 Pkt	80 Pcnt
1734868450	13.8 Volt	140 Pkt	40 Pkt	92 Pcnt
1734866650	13.8 Volt	120 Pkt	40 Pkt	88 Pcnt
1734864850	13.8 Volt	120 Pkt	40 Pkt	85 Pcnt
1734863050	13.8 Volt	120 Pkt	40 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)