This is the latest recevied telemetry packets stored in our database for station/object HS8JUK-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1734980808 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1734980196 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1734979584 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734978973 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734978361 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734977749 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734977138 | 0 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 0 % |
| 1734976526 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734975914 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734975303 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734974691 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734974080 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734973468 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734972856 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1734972245 | 0 Pkt | 0 Pkt | 0 Pkt | -24 dBm | 0 % |
| 1734971633 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734971021 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734970410 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1734969798 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734969186 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1734968575 | 0 Pkt | 0 Pkt | 0 Pkt | -24 dBm | 0 % |
| 1734967963 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734967351 | 0 Pkt | 0 Pkt | 0 Pkt | -29 dBm | 0 % |
| 1734966740 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1734966128 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)