RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IZ1XBB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734919477	13.8 Volt	550 Pkt	160 Pkt	74 Pcnt
1734918876	13.88 Volt	560 Pkt	170 Pkt	74 Pcnt
1734918275	13.8 Volt	570 Pkt	170 Pkt	71 Pcnt
1734917675	13.88 Volt	590 Pkt	180 Pkt	70 Pcnt
1734917074	13.88 Volt	580 Pkt	180 Pkt	67 Pcnt
1734916475	13.88 Volt	590 Pkt	170 Pkt	65 Pcnt
1734915875	13.8 Volt	600 Pkt	160 Pkt	65 Pcnt
1734915275	13.88 Volt	590 Pkt	160 Pkt	64 Pcnt
1734914672	13.88 Volt	580 Pkt	160 Pkt	64 Pcnt
1734914074	13.88 Volt	600 Pkt	160 Pkt	65 Pcnt
1734913471	13.88 Volt	620 Pkt	170 Pkt	66 Pcnt
1734912870	13.88 Volt	630 Pkt	180 Pkt	66 Pcnt
1734912270	13.88 Volt	660 Pkt	200 Pkt	65 Pcnt
1734911669	13.88 Volt	690 Pkt	210 Pkt	65 Pcnt
1734911068	13.88 Volt	730 Pkt	230 Pkt	65 Pcnt
1734910468	13.88 Volt	740 Pkt	240 Pkt	66 Pcnt
1734909870	13.88 Volt	770 Pkt	240 Pkt	67 Pcnt
1734909267	13.88 Volt	770 Pkt	240 Pkt	67 Pcnt
1734908666	13.88 Volt	770 Pkt	230 Pkt	67 Pcnt
1734908066	13.88 Volt	770 Pkt	230 Pkt	68 Pcnt
1734907465	13.88 Volt	760 Pkt	210 Pkt	70 Pcnt
1734906870	13.8 Volt	750 Pkt	200 Pkt	71 Pcnt
1734906269	13.8 Volt	750 Pkt	210 Pkt	72 Pcnt
1734905668	13.88 Volt	750 Pkt	210 Pkt	75 Pcnt
1734905068	13.88 Volt	740 Pkt	210 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)