This is the latest recevied telemetry packets stored in our database for station/object TI0ARC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718650970 | -29 dbm | 3 V | 0 | 0 | 0 |
1718650490 | -31 dbm | 2.99 V | 0 | 0 | 0 |
1718650010 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1718649530 | -28 dbm | 2.97 V | 0 | 0 | 0 |
1718649050 | -31 dbm | 3 V | 0 | 0 | 0 |
1718648570 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718648090 | -31 dbm | 2.99 V | 0 | 0 | 0 |
1718647610 | -32 dbm | 3 V | 0 | 0 | 0 |
1718647130 | -31 dbm | 2.97 V | 0 | 0 | 0 |
1718646650 | -32 dbm | 2.98 V | 0 | 0 | 0 |
1718646170 | -29 dbm | 2.99 V | 0 | 0 | 0 |
1718645691 | -30 dbm | 2.97 V | 0 | 0 | 0 |
1718645210 | -28 dbm | 2.97 V | 0 | 0 | 0 |
1718644730 | -28 dbm | 2.97 V | 0 | 0 | 0 |
1718644250 | -27 dbm | 2.99 V | 0 | 0 | 0 |
1718643770 | -31 dbm | 2.99 V | 0 | 0 | 0 |
1718643290 | -31 dbm | 2.99 V | 0 | 0 | 0 |
1718642810 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718642330 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718641850 | -31 dbm | 2.97 V | 0 | 0 | 0 |
1718641370 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718640890 | -32 dbm | 2.98 V | 0 | 0 | 0 |
1718640410 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718639930 | -32 dbm | 2.99 V | 0 | 0 | 0 |
1718639450 | -29 dbm | 2.99 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)