RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA6BDL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA6BDL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1730424224	5 Pkt	-62 dBm	0.04 V
1730423494	5 Pkt	-61 dBm	0.04 V
1730422764	3 Pkt	-60 dBm	0.04 V
1730422034	6 Pkt	-61 dBm	0.04 V
1730421304	4 Pkt	-59 dBm	0.04 V
1730420574	4 Pkt	-59 dBm	0.04 V
1730419844	6 Pkt	-58 dBm	0.04 V
1730419114	4 Pkt	-60 dBm	0.04 V
1730418384	5 Pkt	-60 dBm	0.04 V
1730417654	3 Pkt	-60 dBm	0.04 V
1730416924	4 Pkt	-59 dBm	0.04 V
1730416194	2 Pkt	-60 dBm	0.04 V
1730415464	4 Pkt	-60 dBm	0.04 V
1730414734	3 Pkt	-59 dBm	0.04 V
1730414004	3 Pkt	-61 dBm	0.04 V
1730413274	3 Pkt	-59 dBm	0.04 V
1730412543	2 Pkt	-59 dBm	0.04 V
1730411813	5 Pkt	-59 dBm	0.04 V
1730411083	5 Pkt	-60 dBm	0.04 V
1730410353	7 Pkt	-59 dBm	0.04 V
1730409624	4 Pkt	-61 dBm	0.04 V
1730408893	7 Pkt	-60 dBm	0.04 V
1730408163	5 Pkt	-58 dBm	0.04 V
1730407433	5 Pkt	-62 dBm	0.04 V
1730406703	3 Pkt	-60 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)