This is the latest recevied telemetry packets stored in our database for station/object VK4RWN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1734921650 | 13.95 Volt | 200 Pkt | 130 Pkt | 48 Pcnt | 0 None |
| 1734912643 | 14.7 Volt | 980 Pkt | 330 Pkt | 63 Pcnt | 0 None |
| 1734910839 | 14.7 Volt | 1010 Pkt | 350 Pkt | 60 Pcnt | 0 None |
| 1734909040 | 13.8 Volt | 1080 Pkt | 290 Pkt | 62 Pcnt | 0 None |
| 1734907240 | 13.8 Volt | 1110 Pkt | 220 Pkt | 65 Pcnt | 0 None |
| 1734905454 | 13.65 Volt | 1110 Pkt | 290 Pkt | 66 Pcnt | 0 None |
| 1734901843 | 13.05 Volt | 460 Pkt | 150 Pkt | 59 Pcnt | 0 None |
| 1734892160 | 12.75 Volt | 930 Pkt | 320 Pkt | 62 Pcnt | 0 None |
| 1734888560 | 12.75 Volt | 820 Pkt | 270 Pkt | 61 Pcnt | 0 None |
| 1734886764 | 12.75 Volt | 770 Pkt | 260 Pkt | 60 Pcnt | 0 None |
| 1734883163 | 12.83 Volt | 720 Pkt | 250 Pkt | 60 Pcnt | 0 None |
| 1734881351 | 12.83 Volt | 670 Pkt | 220 Pkt | 59 Pcnt | 0 None |
| 1734875945 | 12.68 Volt | 680 Pkt | 220 Pkt | 63 Pcnt | 0 None |
| 1734874140 | 12.83 Volt | 730 Pkt | 230 Pkt | 65 Pcnt | 0 None |
| 1734866942 | 12.9 Volt | 490 Pkt | 200 Pkt | 59 Pcnt | 0 None |
| 1734865132 | 12.9 Volt | 430 Pkt | 210 Pkt | 58 Pcnt | 0 None |
| 1734861531 | 12.9 Volt | 350 Pkt | 190 Pkt | 63 Pcnt | 0 None |
| 1734854323 | 12.98 Volt | 220 Pkt | 150 Pkt | 58 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)