RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

GOODMN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GOODMN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Digi1h*	Eff1h*
1734969773	12.8 Volt	200 Pkt	80 Pkt	70 Pcnt
1734969773	12.8 Volt	200 Pkt	80 Pkt	70 Pcnt
1734969173	12.8 Volt	200 Pkt	80 Pkt	68 Pcnt
1734969173	12.8 Volt	200 Pkt	80 Pkt	68 Pcnt
1734968573	12.8 Volt	190 Pkt	80 Pkt	69 Pcnt
1734968573	12.8 Volt	190 Pkt	80 Pkt	69 Pcnt
1734967973	12.8 Volt	190 Pkt	80 Pkt	70 Pcnt
1734967973	12.8 Volt	190 Pkt	80 Pkt	70 Pcnt
1734967373	12.8 Volt	190 Pkt	80 Pkt	68 Pcnt
1734967373	12.8 Volt	190 Pkt	80 Pkt	68 Pcnt
1734966773	12.8 Volt	190 Pkt	70 Pkt	67 Pcnt
1734966773	12.8 Volt	190 Pkt	70 Pkt	67 Pcnt
1734966173	12.8 Volt	180 Pkt	80 Pkt	65 Pcnt
1734966173	12.8 Volt	180 Pkt	80 Pkt	65 Pcnt
1734965573	12.8 Volt	190 Pkt	80 Pkt	67 Pcnt
1734965573	12.8 Volt	190 Pkt	80 Pkt	67 Pcnt
1734964973	12.8 Volt	180 Pkt	80 Pkt	67 Pcnt
1734964973	12.8 Volt	180 Pkt	80 Pkt	67 Pcnt
1734964373	12.8 Volt	180 Pkt	70 Pkt	65 Pcnt
1734964373	12.8 Volt	180 Pkt	70 Pkt	65 Pcnt
1734963773	12.8 Volt	180 Pkt	70 Pkt	66 Pcnt
1734963173	12.8 Volt	190 Pkt	70 Pkt	66 Pcnt
1734963173	12.8 Volt	190 Pkt	70 Pkt	66 Pcnt
1734962574	12.8 Volt	190 Pkt	70 Pkt	68 Pcnt
1734962573	12.8 Volt	190 Pkt	70 Pkt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Digi1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)