This is the latest recevied telemetry packets stored in our database for station/object N3EG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719991599 | 122 | 59 | 30 | 18 | 78 |
1719989797 | 122 | 61 | 30 | 18 | 78 |
1719987996 | 122 | 62 | 30 | 19 | 78 |
1719986197 | 123 | 63 | 31 | 19 | 78 |
1719984396 | 123 | 65 | 30 | 19 | 78 |
1719982596 | 123 | 66 | 31 | 19 | 78 |
1719980797 | 123 | 68 | 32 | 18 | 78 |
1719978996 | 123 | 70 | 32 | 19 | 78 |
1719977198 | 123 | 72 | 32 | 19 | 78 |
1719975396 | 124 | 74 | 33 | 19 | 78 |
1719973596 | 124 | 76 | 34 | 19 | 79 |
1719971796 | 124 | 77 | 34 | 20 | 81 |
1719969996 | 124 | 79 | 35 | 20 | 84 |
1719968196 | 124 | 79 | 35 | 20 | 87 |
1719966398 | 124 | 80 | 35 | 20 | 89 |
1719964596 | 124 | 79 | 36 | 20 | 91 |
1719962797 | 124 | 78 | 35 | 20 | 91 |
1719960997 | 124 | 76 | 35 | 19 | 90 |
1719959196 | 124 | 74 | 34 | 19 | 89 |
1719957395 | 124 | 72 | 33 | 19 | 89 |
1719955597 | 123 | 71 | 33 | 19 | 90 |
1719953796 | 123 | 70 | 32 | 18 | 89 |
1719951995 | 123 | 68 | 32 | 18 | 88 |
1719950195 | 123 | 67 | 31 | 19 | 88 |
1719948396 | 123 | 65 | 30 | 18 | 87 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)