This is the latest recevied telemetry packets stored in our database for station/object ZL1ROT-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734954036 | 128 | 18 | 491 | 0 | 0 |
| 1734953135 | 128 | 18 | 493 | 0 | 0 |
| 1734952234 | 128 | 19 | 492 | 0 | 0 |
| 1734951333 | 129 | 19 | 492 | 0 | 0 |
| 1734950432 | 129 | 19 | 493 | 0 | 0 |
| 1734949531 | 129 | 19 | 492 | 0 | 0 |
| 1734948630 | 129 | 20 | 495 | 0 | 0 |
| 1734947729 | 129 | 20 | 492 | 0 | 0 |
| 1734946828 | 129 | 20 | 491 | 0 | 0 |
| 1734945927 | 129 | 20 | 495 | 0 | 0 |
| 1734945026 | 129 | 21 | 493 | 0 | 0 |
| 1734944128 | 129 | 21 | 494 | 0 | 0 |
| 1734943224 | 127 | 21 | 493 | 0 | 0 |
| 1734942325 | 127 | 22 | 493 | 0 | 0 |
| 1734941422 | 128 | 22 | 493 | 0 | 0 |
| 1734940523 | 130 | 23 | 494 | 187 | 0 |
| 1734939620 | 130 | 23 | 494 | 187 | 0 |
| 1734938719 | 130 | 24 | 493 | 188 | 0 |
| 1734937818 | 131 | 25 | 492 | 442 | 0 |
| 1734936921 | 131 | 25 | 502 | 406 | 0 |
| 1734929714 | 136 | 27 | 524 | 588 | 0 |
| 1734928808 | 136 | 27 | 528 | 593 | 0 |
| 1734927907 | 136 | 27 | 532 | 591 | 0 |
| 1734927006 | 136 | 27 | 528 | 615 | 0 |
| 1734926106 | 136 | 27 | 529 | 510 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)