RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E25RIV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25RIV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1734979846	0 Pkt	-66 dBm	13.62 V
1734979222	0 Pkt	-67 dBm	13.64 V
1734978598	0 Pkt	-67 dBm	13.64 V
1734977974	0 Pkt	-66 dBm	13.62 V
1734977350	0 Pkt	-68 dBm	13.62 V
1734976726	0 Pkt	-68 dBm	13.62 V
1734976102	0 Pkt	-69 dBm	13.62 V
1734975478	0 Pkt	-67 dBm	13.62 V
1734974854	0 Pkt	-68 dBm	13.62 V
1734974231	0 Pkt	-68 dBm	13.62 V
1734973606	0 Pkt	-68 dBm	13.6 V
1734972982	0 Pkt	-68 dBm	13.62 V
1734972358	0 Pkt	-68 dBm	13.62 V
1734971734	1 Pkt	-67 dBm	13.62 V
1734971110	0 Pkt	-68 dBm	13.62 V
1734970487	0 Pkt	-66 dBm	13.62 V
1734969862	0 Pkt	-66 dBm	13.62 V
1734969238	0 Pkt	-65 dBm	13.62 V
1734968614	0 Pkt	-67 dBm	13.62 V
1734967990	0 Pkt	-65 dBm	13.62 V
1734967366	1 Pkt	-66 dBm	13.62 V
1734966741	0 Pkt	-66 dBm	13.62 V
1734966117	0 Pkt	-66 dBm	13.62 V
1734965493	0 Pkt	-65 dBm	13.6 V
1734964869	0 Pkt	-65 dBm	13.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)