RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS4UMA-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4UMA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1734930325	0 Pkt	-54 dBm	0.04 V
1734929959	5 Pkt	-54 dBm	0.02 V
1734929592	0 Pkt	-53 dBm	0.04 V
1734929225	0 Pkt	-54 dBm	0.06 V
1734928858	0 Pkt	-53 dBm	0.04 V
1734928492	0 Pkt	-54 dBm	0.04 V
1734928125	0 Pkt	-54 dBm	0.04 V
1734927758	0 Pkt	-53 dBm	0.02 V
1734927392	0 Pkt	-53 dBm	0.02 V
1734927025	0 Pkt	-53 dBm	0.02 V
1734926658	0 Pkt	-54 dBm	0.04 V
1734926291	0 Pkt	-54 dBm	0.02 V
1734925925	0 Pkt	-54 dBm	0.02 V
1734925558	0 Pkt	-53 dBm	0.02 V
1734925191	0 Pkt	-55 dBm	0.02 V
1734924824	0 Pkt	-54 dBm	0.02 V
1734924458	1 Pkt	-53 dBm	0.04 V
1734924091	0 Pkt	-53 dBm	0.04 V
1734923724	0 Pkt	-54 dBm	0.02 V
1734922991	1 Pkt	-54 dBm	0.02 V
1734922624	0 Pkt	-53 dBm	0.02 V
1734922257	0 Pkt	-53 dBm	0.04 V
1734921890	0 Pkt	-53 dBm	0.02 V
1734921523	1 Pkt	-53 dBm	0.04 V
1734921157	0 Pkt	-53 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)