RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM4KFE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KFE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734955741	67 Pkt	12 Pkt	-39 dBm	13.84 V
1734953898	101 Pkt	9 Pkt	-39 dBm	13.84 V
1734952057	101 Pkt	10 Pkt	-39 dBm	13.84 V
1734950216	87 Pkt	9 Pkt	-39 dBm	13.84 V
1734948376	71 Pkt	11 Pkt	-40 dBm	13.84 V
1734946532	76 Pkt	12 Pkt	-39 dBm	13.84 V
1734944690	86 Pkt	14 Pkt	-39 dBm	13.82 V
1734942843	90 Pkt	18 Pkt	-39 dBm	13.82 V
1734940991	90 Pkt	17 Pkt	-39 dBm	13.82 V
1734939139	73 Pkt	18 Pkt	-39 dBm	13.84 V
1734937288	62 Pkt	15 Pkt	-38 dBm	13.86 V
1734929915	97 Pkt	11 Pkt	-39 dBm	13.84 V
1734928074	57 Pkt	11 Pkt	-39 dBm	13.82 V
1734926231	74 Pkt	18 Pkt	-39 dBm	13.82 V
1734924380	85 Pkt	18 Pkt	-39 dBm	13.82 V
1734922529	88 Pkt	17 Pkt	-39 dBm	13.84 V
1734920680	73 Pkt	18 Pkt	-39 dBm	13.82 V
1734918830	85 Pkt	18 Pkt	-38 dBm	13.84 V
1734916974	89 Pkt	17 Pkt	-39 dBm	13.82 V
1734915123	96 Pkt	11 Pkt	-38 dBm	13.84 V
1734913276	81 Pkt	11 Pkt	-39 dBm	13.86 V
1734911433	47 Pkt	11 Pkt	-40 dBm	13.82 V
1734909594	70 Pkt	29 Pkt	-39 dBm	13.74 V
1734907729	71 Pkt	40 Pkt	-39 dBm	13.84 V
1734905854	49 Pkt	42 Pkt	-41 dBm	13.82 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)