RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

PY4IG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY4IG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734967173	13 Pkt	0 Pkt	7 Pkt	-55 dBm	8.98 V
1734965945	12 Pkt	0 Pkt	2 Pkt	-55 dBm	8.98 V
1734964718	8 Pkt	0 Pkt	5 Pkt	-56 dBm	8.98 V
1734963491	10 Pkt	0 Pkt	7 Pkt	-57 dBm	8.98 V
1734962265	9 Pkt	0 Pkt	9 Pkt	-59 dBm	8.98 V
1734961039	17 Pkt	0 Pkt	11 Pkt	-57 dBm	8.98 V
1734959811	11 Pkt	0 Pkt	17 Pkt	-59 dBm	9 V
1734958584	9 Pkt	0 Pkt	9 Pkt	-57 dBm	8.98 V
1734957358	8 Pkt	0 Pkt	8 Pkt	-56 dBm	8.98 V
1734956132	5 Pkt	0 Pkt	2 Pkt	-63 dBm	9 V
1734951236	3 Pkt	0 Pkt	0 Pkt	-60 dBm	8.98 V
1734950011	7 Pkt	0 Pkt	0 Pkt	-62 dBm	9 V
1734947561	14 Pkt	0 Pkt	8 Pkt	-61 dBm	8.98 V
1734946334	6 Pkt	0 Pkt	10 Pkt	-63 dBm	9 V
1734945109	8 Pkt	0 Pkt	4 Pkt	-61 dBm	8.98 V
1734941431	7 Pkt	0 Pkt	12 Pkt	-64 dBm	8.96 V
1734940205	7 Pkt	0 Pkt	10 Pkt	-60 dBm	8.98 V
1734938980	6 Pkt	0 Pkt	12 Pkt	-60 dBm	8.98 V
1734937755	5 Pkt	0 Pkt	14 Pkt	-61 dBm	8.98 V
1734936529	5 Pkt	0 Pkt	8 Pkt	-65 dBm	9 V
1734926728	6 Pkt	20 Pkt	7 Pkt	-64 dBm	9 V
1734925464	2 Pkt	59 Pkt	9 Pkt	-63 dBm	9 V
1734924150	0 Pkt	42 Pkt	1 Pkt	-66 dBm	8.98 V
1734922883	0 Pkt	47 Pkt	0 Pkt	-62 dBm	8.98 V
1734921607	0 Pkt	44 Pkt	0 Pkt	-64 dBm	8.98 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)