This is the latest recevied telemetry packets stored in our database for station/object KD8NJV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736462703 | 12.91 Volts | 8.51 Deg.C | 0 | 0 | 0 |
| 1736451948 | 12.91 Volts | 6.07 Deg.C | 0 | 0 | 0 |
| 1736448365 | 12.93 Volts | 4.11 Deg.C | 0 | 0 | 0 |
| 1736444782 | 12.91 Volts | 2.65 Deg.C | 0 | 0 | 0 |
| 1736441199 | 12.91 Volts | 0.69 Deg.C | 0 | 0 | 0 |
| 1736437617 | 12.91 Volts | -0.29 Deg.C | 0 | 0 | 0 |
| 1736434036 | 12.91 Volts | -1.27 Deg.C | 0 | 0 | 0 |
| 1736426871 | 12.91 Volts | 0.2 Deg.C | 0 | 0 | 0 |
| 1736423289 | 12.91 Volts | 0.69 Deg.C | 0 | 0 | 0 |
| 1736419707 | 12.93 Volts | 1.67 Deg.C | 0 | 0 | 0 |
| 1736416126 | 12.91 Volts | 2.65 Deg.C | 0 | 0 | 0 |
| 1736412541 | 12.91 Volts | 3.13 Deg.C | 0 | 0 | 0 |
| 1736408958 | 12.91 Volts | 3.13 Deg.C | 0 | 0 | 0 |
| 1736405374 | 12.91 Volts | 3.13 Deg.C | 0 | 0 | 0 |
| 1736401791 | 12.91 Volts | 3.62 Deg.C | 0 | 0 | 0 |
| 1736398206 | 12.91 Volts | 3.62 Deg.C | 0 | 0 | 0 |
| 1736394622 | 12.91 Volts | 4.11 Deg.C | 0 | 0 | 0 |
| 1736391039 | 12.91 Volts | 4.6 Deg.C | 0 | 0 | 0 |
| 1736387455 | 12.93 Volts | 5.58 Deg.C | 0 | 0 | 0 |
| 1736383873 | 12.91 Volts | 6.07 Deg.C | 0 | 0 | 0 |
| 1736380289 | 12.91 Volts | 7.54 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.029, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)