RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ED6YAE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED6YAE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DC*	RxP-1h*	Dg1h*	Eff1h*
1734953509	10.95 Volt	250 Pkt	210 Pkt	75 *100
1734953209	10.88 Volt	250 Pkt	210 Pkt	74 *100
1734952909	10.95 Volt	250 Pkt	210 Pkt	74 *100
1734952610	10.95 Volt	250 Pkt	210 Pkt	77 *100
1734952310	10.95 Volt	250 Pkt	210 Pkt	75 *100
1734952010	11.03 Volt	260 Pkt	210 Pkt	74 *100
1734951709	11.03 Volt	250 Pkt	210 Pkt	72 *100
1734951410	11.03 Volt	260 Pkt	210 Pkt	72 *100
1734951109	10.8 Volt	250 Pkt	210 Pkt	71 *100
1734950810	10.8 Volt	260 Pkt	210 Pkt	73 *100
1734950510	10.95 Volt	260 Pkt	220 Pkt	72 *100
1734950210	10.95 Volt	260 Pkt	210 Pkt	71 *100
1734949910	10.95 Volt	260 Pkt	210 Pkt	69 *100
1734949610	10.95 Volt	270 Pkt	220 Pkt	68 *100
1734949310	10.95 Volt	270 Pkt	220 Pkt	67 *100
1734949010	10.95 Volt	270 Pkt	220 Pkt	67 *100
1734948710	10.95 Volt	270 Pkt	210 Pkt	67 *100
1734948410	10.95 Volt	270 Pkt	210 Pkt	67 *100
1734948110	10.95 Volt	260 Pkt	200 Pkt	67 *100
1734947810	11.03 Volt	260 Pkt	200 Pkt	66 *100
1734947510	11.1 Volt	260 Pkt	200 Pkt	64 *100
1734947210	11.18 Volt	260 Pkt	200 Pkt	64 *100
1734946910	11.25 Volt	250 Pkt	190 Pkt	64 *100
1734946610	11.18 Volt	250 Pkt	190 Pkt	64 *100
1734946310	11.1 Volt	250 Pkt	180 Pkt	65 *100

*Used Equation Coefficients:

DC: 0, 0.075, 0

RxP-1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DC-1: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)