This is the latest recevied telemetry packets stored in our database for station/object WH6AZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | Charge* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719431156 | 3.5 Volts | 22 % | 0 | 0 | 0 |
1719430866 | 3.52 Volts | 25 % | 0 | 0 | 0 |
1719429699 | 3.5 Volts | 22 % | 0 | 0 | 0 |
1719429401 | 3.5 Volts | 22 % | 0 | 0 | 0 |
1719429110 | 3.49 Volts | 21 % | 0 | 0 | 0 |
1719428808 | 3.48 Volts | 20 % | 0 | 0 | 0 |
1719428467 | 3.49 Volts | 21 % | 0 | 0 | 0 |
1719427284 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719425786 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719425191 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719424597 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719423083 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719422482 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719421903 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719421270 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719420688 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719414964 | 3.47 Volts | 18 % | 0 | 0 | 0 |
1719414384 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719412905 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719411996 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719411085 | 3.48 Volts | 19 % | 0 | 0 | 0 |
1719410188 | 3.48 Volts | 20 % | 0 | 0 | 0 |
1719408985 | 3.48 Volts | 20 % | 0 | 0 | 0 |
1719407809 | 3.49 Volts | 20 % | 0 | 0 | 0 |
1719407473 | 3.49 Volts | 20 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Charge: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)