RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SHLDR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SHLDR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Temp*	Temp*
1734886358	11.48 Volt	4 C	-62 C
1734884259	11.18 Volt	4 C	-62 C
1734882159	11.55 Volt	4 C	-62 C
1734880059	11.55 Volt	4 C	-62 C
1734877959	11.55 Volt	4 C	-62 C
1734875859	11.55 Volt	4 C	-62 C
1734873759	11.55 Volt	4 C	-62 C
1734871659	11.55 Volt	4 C	-62 C
1734869559	11.55 Volt	4 C	-62 C
1734867459	11.55 Volt	4 C	-62 C
1734865359	11.55 Volt	4.5 C	-62 C
1734863259	11.55 Volt	4.5 C	-62 C
1734861159	10.95 Volt	4.5 C	-62 C
1734859059	11.55 Volt	4.5 C	-62 C
1734856959	11.55 Volt	4.5 C	-62 C
1734854859	11.55 Volt	4.5 C	-62 C
1734852760	11.55 Volt	5 C	-62 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -67

Temp: 0, 0.5, -62

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)