This is the latest recevied telemetry packets stored in our database for station/object 5B4ALR-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | AirQuality* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735001831 | -74 dbm | 1 K | 0 | 0 | 0 |
| 1735001231 | -74 dbm | 1.07 K | 0 | 0 | 0 |
| 1735000631 | -74 dbm | 1.11 K | 0 | 0 | 0 |
| 1735000031 | -74 dbm | 1.18 K | 0 | 0 | 0 |
| 1734999431 | -74 dbm | 1.16 K | 0 | 0 | 0 |
| 1734998831 | -74 dbm | 1.13 K | 0 | 0 | 0 |
| 1734998231 | -73 dbm | 1.02 K | 0 | 0 | 0 |
| 1734997630 | -74 dbm | 1.16 K | 0 | 0 | 0 |
| 1734997031 | -74 dbm | 1.18 K | 0 | 0 | 0 |
| 1734996431 | -73 dbm | 1.22 K | 0 | 0 | 0 |
| 1734995831 | -74 dbm | 1.26 K | 0 | 0 | 0 |
| 1734995231 | -74 dbm | 1.3 K | 0 | 0 | 0 |
| 1734994631 | -74 dbm | 1.24 K | 0 | 0 | 0 |
| 1734994030 | -73 dbm | 1.25 K | 0 | 0 | 0 |
| 1734993430 | -74 dbm | 1.43 K | 0 | 0 | 0 |
| 1734992831 | -74 dbm | 1.48 K | 0 | 0 | 0 |
| 1734992231 | -72 dbm | 1.57 K | 0 | 0 | 0 |
| 1734991631 | -74 dbm | 1.58 K | 0 | 0 | 0 |
| 1734991031 | -73 dbm | 1.59 K | 0 | 0 | 0 |
| 1734990430 | -74 dbm | 1.59 K | 0 | 0 | 0 |
| 1734989830 | -74 dbm | 1.57 K | 0 | 0 | 0 |
| 1734989230 | -74 dbm | 1.57 K | 0 | 0 | 0 |
| 1734988630 | -73 dbm | 1.59 K | 0 | 0 | 0 |
| 1734988031 | -72 dbm | 1.53 K | 0 | 0 | 0 |
| 1734987431 | -73 dbm | 1.53 K | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
AirQuality: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)