RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VA6AKA-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA6AKA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1734999739	14.12 Volts	10.96 Deg.C
1734999655	14.12 Volts	10.47 Deg.C
1734999616	14.18 Volts	10.47 Deg.C
1734999576	14.18 Volts	10.47 Deg.C
1734999427	14.15 Volts	9 Deg.C
1734999339	14.06 Volts	8.51 Deg.C
1734999288	14.21 Volts	8.51 Deg.C
1734999220	14.18 Volts	7.54 Deg.C
1734999150	14.15 Volts	7.05 Deg.C
1734999111	14.09 Volts	7.05 Deg.C
1734999041	14.09 Volts	6.56 Deg.C
1734998971	14.03 Volts	6.07 Deg.C
1734998931	14.06 Volts	5.58 Deg.C
1734998862	14.01 Volts	5.09 Deg.C
1734998821	14.01 Volts	4.6 Deg.C
1734998713	14.03 Volts	3.13 Deg.C
1734998669	14.18 Volts	2.65 Deg.C
1734998590	14.03 Volts	1.67 Deg.C
1734965071	14.03 Volts	17.81 Deg.C
1734964884	14.06 Volts	17.81 Deg.C
1734964753	14.09 Volts	17.32 Deg.C
1734964712	14.03 Volts	17.32 Deg.C
1734964642	14.03 Volts	17.32 Deg.C
1734964573	14.06 Volts	16.83 Deg.C
1734964533	14.06 Volts	16.83 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)