RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE7SML-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7SML-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734913868	12.75 Volt	0 Pkt	0 Pkt	16 Pcnt
1734912967	12.75 Volt	0 Pkt	0 Pkt	12 Pcnt
1734912667	12.75 Volt	0 Pkt	0 Pkt	16 Pcnt
1734912366	12.75 Volt	0 Pkt	0 Pkt	15 Pcnt
1734912066	12.75 Volt	0 Pkt	0 Pkt	18 Pcnt
1734911770	12.75 Volt	0 Pkt	0 Pkt	21 Pcnt
1734911466	12.83 Volt	0 Pkt	0 Pkt	20 Pcnt
1734911165	12.83 Volt	0 Pkt	0 Pkt	12 Pcnt
1734910865	12.83 Volt	0 Pkt	0 Pkt	13 Pcnt
1734910565	12.83 Volt	0 Pkt	0 Pkt	22 Pcnt
1734910264	12.83 Volt	0 Pkt	0 Pkt	25 Pcnt
1734909970	12.83 Volt	0 Pkt	0 Pkt	32 Pcnt
1734909664	12.83 Volt	0 Pkt	0 Pkt	36 Pcnt
1734909364	12.9 Volt	10 Pkt	10 Pkt	42 Pcnt
1734909063	12.9 Volt	10 Pkt	10 Pkt	46 Pcnt
1734908763	12.9 Volt	10 Pkt	10 Pkt	48 Pcnt
1734908463	12.98 Volt	10 Pkt	10 Pkt	52 Pcnt
1734907862	13.05 Volt	10 Pkt	10 Pkt	72 Pcnt
1734907562	13.05 Volt	10 Pkt	10 Pkt	85 Pcnt
1734907262	13.2 Volt	20 Pkt	20 Pkt	86 Pcnt
1734906961	13.35 Volt	20 Pkt	20 Pkt	86 Pcnt
1734906661	13.35 Volt	20 Pkt	20 Pkt	91 Pcnt
1734906366	13.5 Volt	20 Pkt	20 Pkt	91 Pcnt
1734906060	13.65 Volt	20 Pkt	20 Pkt	95 Pcnt
1734905760	13.73 Volt	20 Pkt	20 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)