This is the latest recevied telemetry packets stored in our database for station/object BULLMT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716189004 | 176 | 24 | 23 | 20 | 41 |
1716186605 | 176 | 24 | 24 | 21 | 42 |
1716184204 | 176 | 24 | 23 | 20 | 42 |
1716181806 | 176 | 24 | 24 | 21 | 42 |
1716179408 | 177 | 24 | 23 | 21 | 42 |
1716177005 | 176 | 24 | 24 | 21 | 42 |
1716174603 | 176 | 24 | 24 | 21 | 42 |
1716172204 | 176 | 24 | 24 | 21 | 42 |
1716169805 | 176 | 24 | 23 | 21 | 42 |
1716167403 | 176 | 24 | 23 | 21 | 42 |
1716165004 | 176 | 24 | 23 | 20 | 41 |
1716162616 | 176 | 23 | 23 | 21 | 42 |
1716160206 | 176 | 23 | 23 | 21 | 42 |
1716157813 | 176 | 24 | 23 | 20 | 41 |
1716155404 | 176 | 24 | 23 | 21 | 42 |
1716153005 | 176 | 24 | 23 | 21 | 42 |
1716150602 | 176 | 23 | 23 | 21 | 42 |
1716148202 | 169 | 23 | 23 | 20 | 41 |
1716145802 | 176 | 24 | 24 | 21 | 42 |
1716143401 | 176 | 24 | 23 | 20 | 41 |
1716141004 | 176 | 24 | 23 | 20 | 42 |
1716138604 | 176 | 24 | 23 | 21 | 42 |
1716136201 | 176 | 24 | 23 | 20 | 42 |
1716133804 | 176 | 24 | 23 | 21 | 41 |
1716131403 | 176 | 24 | 23 | 21 | 42 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)