RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SQ3VAS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3VAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	VBAT*
1734957995	-76 dbm	4.2 V
1734957424	-76 dbm	4.2 V
1734956853	-76 dbm	4.2 V
1734956281	-77 dbm	4.2 V
1734955710	-77 dbm	4.2 V
1734955139	-77 dbm	4.2 V
1734954567	-78 dbm	4.2 V
1734953996	-76 dbm	4.2 V
1734953424	-76 dbm	4.2 V
1734952853	-76 dbm	4.2 V
1734952283	-76 dbm	4.2 V
1734951709	-76 dbm	4.2 V
1734951138	-76 dbm	4.2 V
1734950566	-76 dbm	4.2 V
1734949995	-76 dbm	4.2 V
1734949422	-77 dbm	4.2 V
1734948851	-76 dbm	4.2 V
1734948279	-76 dbm	4.2 V
1734947708	-76 dbm	4.2 V
1734947137	-76 dbm	4.2 V
1734946564	-76 dbm	4.2 V
1734945993	-76 dbm	4.2 V
1734945421	-76 dbm	4.2 V
1734944849	-76 dbm	4.2 V
1734944277	-76 dbm	4.2 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)