This is the latest recevied telemetry packets stored in our database for station/object F4CVH-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734969156 | 35 | -113 | 999 | 722 | 599 |
| 1734967454 | 35 | -113 | 999 | 722 | 600 |
| 1734965753 | 35 | -113 | 999 | 720 | 599 |
| 1734964052 | 35 | -113 | 999 | 720 | 599 |
| 1734962351 | 35 | -113 | 999 | 722 | 600 |
| 1734960650 | 35 | -113 | 999 | 722 | 600 |
| 1734958949 | 36 | -113 | 999 | 722 | 600 |
| 1734957247 | 35 | -113 | 999 | 723 | 604 |
| 1734948839 | 36 | -114 | 999 | 722 | 601 |
| 1734947138 | 36 | -114 | 999 | 721 | 604 |
| 1734945437 | 36 | -113 | 999 | 722 | 603 |
| 1734943736 | 35 | -113 | 999 | 719 | 602 |
| 1734942036 | 35 | -113 | 999 | 720 | 602 |
| 1734940334 | 35 | -113 | 999 | 721 | 603 |
| 1734938634 | 35 | -113 | 999 | 721 | 601 |
| 1734936935 | 36 | -113 | 998 | 720 | 599 |
| 1734930128 | 36 | -113 | 999 | 720 | 600 |
| 1734928427 | 36 | -113 | 998 | 720 | 600 |
| 1734926726 | 36 | -114 | 999 | 723 | 602 |
| 1734909528 | 35 | -113 | 998 | 718 | 598 |
| 1734907827 | 35 | -113 | 999 | 722 | 604 |
| 1734906126 | 34 | -124 | 999 | 740 | 632 |
| 1734904162 | 36 | -113 | 999 | 720 | 598 |
| 1734902461 | 36 | -113 | 999 | 719 | 597 |
| 1734900760 | 35 | -113 | 999 | 720 | 598 |
*Used Equation Coefficients:
Value1: 0, 1, -126
Value2: 0, 1, -126
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)