This is the latest recevied telemetry packets stored in our database for station/object IZ5MMH-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734965617 | -85 dbm | 3.08 V | 0 | 0 | 0 |
| 1734965017 | -84 dbm | 3.08 V | 0 | 0 | 0 |
| 1734964417 | -85 dbm | 3.08 V | 0 | 0 | 0 |
| 1734963817 | -85 dbm | 3.08 V | 0 | 0 | 0 |
| 1734963217 | -87 dbm | 3.08 V | 0 | 0 | 0 |
| 1734962617 | -87 dbm | 3.08 V | 0 | 0 | 0 |
| 1734962017 | -88 dbm | 3.09 V | 0 | 0 | 0 |
| 1734961417 | -85 dbm | 3.08 V | 0 | 0 | 0 |
| 1734960817 | -86 dbm | 3.09 V | 0 | 0 | 0 |
| 1734960217 | -86 dbm | 3.08 V | 0 | 0 | 0 |
| 1734959617 | -78 dbm | 3.08 V | 0 | 0 | 0 |
| 1734959017 | -83 dbm | 3.08 V | 0 | 0 | 0 |
| 1734958417 | -84 dbm | 3.08 V | 0 | 0 | 0 |
| 1734957817 | -85 dbm | 3.08 V | 0 | 0 | 0 |
| 1734957217 | -80 dbm | 3.08 V | 0 | 0 | 0 |
| 1734956617 | -79 dbm | 3.08 V | 0 | 0 | 0 |
| 1734956017 | -78 dbm | 3.08 V | 0 | 0 | 0 |
| 1734955417 | -80 dbm | 3.09 V | 0 | 0 | 0 |
| 1734954817 | -78 dbm | 3.08 V | 0 | 0 | 0 |
| 1734954217 | -78 dbm | 3.08 V | 0 | 0 | 0 |
| 1734953617 | -79 dbm | 3.09 V | 0 | 0 | 0 |
| 1734953017 | -76 dbm | 3.08 V | 0 | 0 | 0 |
| 1734952418 | -84 dbm | 3.09 V | 0 | 0 | 0 |
| 1734951817 | -83 dbm | 3.09 V | 0 | 0 | 0 |
| 1734951217 | -83 dbm | 3.09 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)